EECT 101 Videos - Oscilloscopes

The following videos will help explain in more detail how to use an oscilloscope.

Test Equipment - The Oscilloscope Part 1 (E.J. Daigle)
Test Equipment - The Oscilloscope Part 1 (E.J. Daigle)

Dunwoody College's Elftmann Success Center invites you to enhance your learning of inductors. For more tutoring videos, including the same topic presented with a different approach, see http://www.youtube.com/view_play_list?p=275D63C4D35436DD.
Time =13:06
Test Equipment - The Oscilloscope Part 2 (E.J. Daigle)
Test Equipment - The Oscilloscope Part 2 (E.J. Daigle)

Dunwoody College's Elftmann Success Center invites you to enhance your learning of inductors. For more tutoring videos, including the same topic presented with a different approach, see http://www.youtube.com/view_play_list?p=275D63C4D35436DD.
Time =14:23
Tektronix Oscilloscope Tutorial Part 1
Tektronix Oscilloscope Tutorial Part 1

Step by step guide on how to operate a Tektronix 1000/2000 series Oscilloscope. Basic functions covered.
Time =5:33
AC vs DC Explained and How to Use an Oscilloscope
AC vs DC Explained and How to Use an Oscilloscope

Explaining AC and DC is easy if you can use an oscilloscope, how to use an oscilloscope is fairly easy when using AC and DC as examples, it made sense to me so here goes.

Time =12:02
How to use an oscilloscope with an A/C source
How to use an oscilloscope with an A/C source

This clips shows how to use an oscilloscope to measure the frequency and voltage of a signal from an A/C source
Time =3:52
Tektronix Oscilloscope Triggering controls and their usage
Tektronix Oscilloscope Triggering controls and their usage

This video describes the Triggering controls on a typical Tektronix analog oscilloscope. Other analog scopes will typically be similar. The video presents the Trigger Level, Slope, Source, Coupling, Mode and Holdoff controls, and how each of them are use
Time =14:20